Telemetry Configuration - Vario Configuration Vario Configuration

• Sound Configuration, shows an overview about the vario sound behaviour.
  • First you see the live value of the height (AGL) and the climbrate in the first row. This is only for your information.
  • Now you can adjust the vario tone to thresholds.
    • The first row shows the the values for the climbrate in meter per second
    • the second row indicates the frequency of the vario tone in Hz
    • and the bottom row is the tone type: continuous or slow beeping or fast beeping


• Sensors, is the setup and configuration option of all attached sensors to the Link Vario
  • Input is the physical sensor plug at the Link vario, some of these inputs have to be configurated, some not.
    • A = temperature
    • B = speed
    • B = speed
    • CURRENT SENSOR
  • Item names the sensor or the calculated telemetry option, only for your information
  • Sensor, here you have to assign the
    • current sensor ( current sensor SM 20, SM 80, SM 150, SM 400 ) which is attached to the Link Vario.
    • preset for the true airspeed sensor ( max. 250km/h or max. 400km/h )
  • Logging, setup the logging speed of the each value, choose the logging rate ( 0.1 / 0.2 / 0.5 / 1/ 2 / 4 / 5 / 10 Hz )